ESB Specified Palisade

The increase in crime and vandalism has dictated the need for a secure perimeter fencing system and JNC Palisade is increasingly seen by Owner and Insurance company alike as a cost-effective solution to the perimeter problem.

• BS-EN ISO 1461:2009 (Hot dipped Galvanising)
• BS-EN ISO 13438:2013 (Powdercoating)
• BS-EN ISO 1722-16:2009 (Fencing)
• Security Level: Category 3

SECURITY LEVEL: Security Purpose

JNC Fencing are the only ROI manufacturers of ESB D steel palisade fencing systems.  This allows us to provide standard and EU compliant systems as well as enabling us to adapt bespoke systems to suit all requirements.

Steel Palisade standard height 2.60m

Pales embedded in concrete plinth:
Rolled D section; 23 pales, 3.50mm Pales Triple Spiked

Rails With Earthing detail:
Horizontal support rails 50x50x6mm RSA

Posts With Earthing detail:
100×55/8.1kg’s IPE 2.75m post centres. Baseplate options available

Fixings With Earthing detail:
M12×30mm cup square bolts & M12 shear nuts.

Swinging Stock Gates:

1.10m Single Leaf (left & rights), 4.90mDouble Leaf.

Nonstandard gates can be manufactured to order if required. Sliding & Cantilever also available to order

Other, non-ESB Networks options are available with pale thickness from 2.00mm to 3.00mm dependant upon the desired use (pointed tops not being recommended for systems below 2000mm high).

Bolted options and available for “raking” to follow the topography of the site without any compromise in security or system rigidity and with no time consuming/ costly modification requirements on site. Rails are quickly and easily fixed to posts and can follow most demanding site gradients. “Steps” can also be used on welded sections

Data sheet available upon request